Details:
- 1 Inch Plastic Cam Buckle Endless Loop Tie-Down
- CBP1K 1 Inch Black Plastic Cam Buckle
- Endless Loop (No Hooks), End of Strap Angle Cut
- Total Strap Length 2 Ft (24 Inches)
- CW1-E6PP 1 Inch Lightweight Green Polypropylene Webbing
- 100 lb Break Strength
- 33 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.08 lb
$3.19 Each
10+ = $2.78
50+ = $2.51
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
- Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Wrapped Around The Cargo And The Loose End Is Fed Back Thru The Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
- Cam Buckles Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
- This Product Is Built Using A Snap-down Style Cam Buckle, Which Means The Cam Lever On The Buckle Snap Down Tight On The Webbing, There Is No Spring Mechanism On The Cam Lever
- For Proper Feeding Of The Snap-down Cam Buckle, The Loose End Of The Strap Must Be Fed Through The Cam Lever From Back To Front For Proper Operation
- End Of The Strap Is Angle Cut To Make Feeding The Strap Thru The Buckle Easier
- Light Duty Cam Buckle For Light Commercial Or General Applications
- Cam Buckle Is Made Of Black Plastic Material
- Strap Is Made With Lightweight Polypropylene Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Only, The Buckle Is Not Included In The Length
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Strap Next To The Buckle
- Snap-down Style Cam Buckles Require That The Strap Be Fed Through The Cam Lever From Back Through The Front In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Cam Lever From Front To Back, It Will Not Hold To The Properly
