Details:
- 1 Inch Plastic Ladder Lock Endless Loop Tie-Down
- Black Thread
- CFLLP1K-1C 1 Inch Black Plastic Ladder Lock Buckle
- Endless Loop (No Hooks), End of Strap Angle Cut
- Total Strap Length 2 Ft (24 Inches)
- CW1-E6PP 1 Inch Lightweight Green Polypropylene Webbing
- 100 lb Break Strength
- 33 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.04 lb
$2.89 Each
10+ = $2.53
50+ = $2.29
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Ladder Lock Tie-down, Buckle On One End, Strap Loops Back To Buckle
- Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Wrapped Around The Cargo And The Loose End Is Fed Back Thru The Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
- Ladder Locks Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
- A Ladder Lock Is Tightened By Feeding The Loose End Of The Webbing Around The Middle Bar Of The Buckle And Back Thru The Front Bar Of The Buckle, Then Pull Strap Tight
- End Of The Strap Is Angle Cut To Make Feeding The Strap Thru The Buckle Easier
- Light Duty Ladder Lock Buckle For Light Commercial And Household Applications
- Ladder Lock Buckle Is Made Of Black Plastic Material
- Strap Is Made With Lightweight Polypropylene Webbing
- Sewn With Black Polyester Thread
- Strap Length Is Measured As The Webbing Only, The Buckle Is Not Included In The Length
- Strap Is Sewn In The Standard Method Immediately Behind The Buckle
- CTD Strap Warning Tag Sewn On The Strap Next To The Buckle
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 12793
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 2097 | Sewn With Silver Polyester Thread |
