Complete your order
Pricing & ordering
Choose your quantity and add this customized configuration to your cart.
$9.09 Each
10+ = $8.19
50+ = $7.39
Product at a glance
Details & specifications
Break strength
300 lb
Working load limit
100 lb
1 Inch Strap Extender
Components & materials
- CHSSHV1Z-3C swivel snap hook on both ends
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
Dimensions
- Product weight: 0.29 lb
- Total Strap Length 2 Ft (24 Inches)
Product notes
- Tie-downs, Strap Extender, Swiveling Snap Hook On Each End
- Strap Extender Configuration, No Buckle Or Tightening Device, Only A Strap With An End-fitting On Each End
- Swivel Snap Hook On Each Has A Retaining Clip That Helps Prevent The Hook From Unintentionally Detaching
- The Hook End Of The Swivel Snap Hooks Swivels A Full 360 Degrees
- The Release Trigger Presses Parallel To The Hook And Does Not Reduce The Hook Opening Size
- Light Duty Swiveling Snap Hooks For Light Commercial And General Use
- Swiveling Snap Hooks Are Made Of Zinc-diecast Material And Have A Silver Colored Nickel Plated Finish
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured Outside Tip To Tip Of The Snap Hooks
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On One Hook End Of The Strap
Component specifications
Component strengths
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW1-Y3PE | 1 Inch 3M Yellow Polyester Tie-Down Webbing | 3,000 lb | 1,000 lb |
| CHSSHV1Z-3C | 1 Inch Zinc-Diecast Bolt Swivel Snap Hook, Nickel Plated | 300 lb | 100 lb |
Safety information
Special warnings
- Product Is Not A Sling Nor Rated For Use As A Sling. Do Not Use For Lifting Or Personal Restraint.
Additional views
Product images
Compare your options
Available Product Variations
There are no additional product variations currently available.
For help finding another option, contact customer service at sales@customtiedowns.com or 1-877-360-5528.
PRODUCT MODELING
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 59 arrow_forward Config = 148 arrow_forward Family = 148 arrow_forward Type = 1190
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 59 arrow_forward Config = 148 arrow_forward Family = 148 arrow_forward Type = 1190
