Details:
- 1 Inch Cinch Style Zinc Diecast Cam Buckle, Black
- 550 lb Break Strength
- 183 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.12 lb
$2.19 Each
100+ = $1.88
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
SPECIAL WARNINGS:
- Component Only, Buckle, Cinch Cam Buckle, Hardware Only
- Cinch Style Cam Buckle, Component Only
- Cinch Style Cam Buckles Require That The Strap Be Fed From Below The Cam Teeth Opening And Out The Top To Properly Hold The Strap After Tightening
- Cam Buckles Are Pulled Tight By Hand. There Is No Mechanical Tightening Mechanism
- A Cam Buckle Is Made Up Of Two Parts, The Frame And The Cam Trigger That Hinges In The Frame
- The Cam Trigger Typically Has Teeth Or Holding Surface That When Pressed Against The Frame Holds Tight
- Cam Buckles Can Be Used In An Endless Loop Configuration Or As A 2 Part Tie-down With A Fixed End And Adjustable Strap
- Standard Duty Cam Buckle For General Purpose And Light Duty Applications
- Cam Buckle Is Made Of Zinc-diecast Material And Does Not Rust. The Buckle Has Black Resin Finish
- The Cam Buckle Has A Standard Height Release Trigger
- Noted Width Refers To The Size Of Strap The Buckle Is Designed To Be Used With
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CS1-5C | 1 Inch Cinch Style Zinc Diecast Cam Buckle | 550 lb | 183 lb |
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Available Product Variations
Browse the default product for each available product type in this family. Color, length, and material can be adjusted on the product page.
PRODUCT MODELING
Top = 4 arrow_forward Group = 9 arrow_forward Layout = 19 arrow_forward Config = 4207 arrow_forward Family = 1190 arrow_forward Type = 11807
Top = 4 arrow_forward Group = 9 arrow_forward Layout = 19 arrow_forward Config = 4207 arrow_forward Family = 1190 arrow_forward Type = 11807
