Complete your order
Pricing & ordering
Choose your quantity and add this customized configuration to your cart.
$26.09 Each
10+ = $23.69
50+ = $21.38
Product at a glance
Details & specifications
Break strength
1000 lb
Working load limit
333 lb
1 Inch Toothless Cam Buckle Tie Down
Components & materials
- CBT1Z-2M 1 Inch Toothless Cam Buckle, Zinc-silver
- CHFS1-3M flat hook with Spring retainer clip, hook facing down, on both ends, pull loop sewn on the adjustable strap with high contrast red accent
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
Dimensions
- Product weight: 1.01 lb
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
Additional details
- No Strap Tag
Product notes
- Tie-downs, Cam Buckle Tie-down, Flat Hook On Both Ends
- One Piece Toothless Cam Buckle Tie-Down Configuration, Made Up Of A Fixed End Strap Sewn To The Buckle And An Adjustable Strap Fed Through The Cam Buckle Then Sewn So The Strap Is Not Removable
- Toothless Cam Buckles Are Made Up Of A Frame And Lever Arm Connected By A Hinge Pin Toward The Back
- Toothless Cam Buckles Have A Mandrel That Turns When The Lever Arm Is Closed Into The Frame
- Toothless Cam Buckles Are Tightened By Pulling The Slack Out Of The Adjustable Strap, Then Closing The Buckle To Generate A Small Amount Of Tightening Tension
- A Pull Loop Is Sewn On The End Of The Adjustable Strap To Make Tightening Easier
- Flat Hook With Spring Retaining Clip Are Sewn On The End Of Both The Adjustable And Fixed End Straps
- Flat Hooks Have A Built In Retainer Clip That Must Be Engaged To Release The Hook After It Is Attached To An Anchor Point
- Flat Hooks Are Orientated So The Hook Curvature Faces Down Relative To The Buckle Lying Flat
- There Is A High Contrast Colored Webbing Tab Sewn On The Top And Bottom Of The Pull Loop For Increased Visibility
- Commercial Duty Toothless Cam Buckle For Great Strength And Durability
- Toothless Cam Buckle Is Made Of Steel And Has Zinc-yellow Plating For Superior Weather Protection
- Heavy Duty Flat Hook With Spring Retainer Clip For The Highest Strength And Durability
- Flat Hooks Are Made Of Steel And Have A Zinc-yellow Plating For Superior Weather Protection
- Flat Hooks Have The Standard Hook Configuration
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Length Only, Buckle And Flat Hooks Are Not Included In The Length Measurement
- Product Is Sewn In The Standard Method To Meet The Provided Strength Rating
- No Strap Tag Or Warning Label Sewn On The Product
- No Instruction Sheet Included
Component specifications
Component strengths
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW1-Y3PE | 1 Inch 3M Yellow Polyester Tie-Down Webbing | 3,000 lb | 1,000 lb |
| CW2-R12PP | 2 Inch Lightweight Red Polypropylene Webbing | 1,200 lb | 400 lb |
| CHFS1-3M | 1 Inch 3M Flat Hook With Spring Keeper, Zinc-Yellow | 3,300 lb | 1,100 lb |
| CBT1Z-2M | 1 Inch Toothless Cam Buckle, Zinc-silver | 2,000 lb | 667 lb |
Safety information
Special warnings
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Additional views
Product images
Compare your options
Available Product Variations
There are no additional product variations currently available.
For help finding another option, contact customer service at sales@customtiedowns.com or 1-877-360-5528.
