Details:
- 1 Inch Cinch Cam Buckle Tie Down
- Black Polyester Thread
- CS1K-1M 1 Inch Black Zinc Diecast Cam Buckle
- 3 inch flat Sewn Loop on both ends
- Fixed End 0.33 Ft (4 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.33 Ft (64 Inches)
- CW1-R8PP 1 Inch Heavyweight Red Polypropylene Webbing
- 600 lb Break Strength
- 200 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.22 lb
$7.49 Each
10+ = $6.72
50+ = $6.06
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
SPECIAL WARNINGS:
- Tie-downs, Cam Buckle Tie-down, Flat Sewn Loop On Both Ends
- Two Part Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And A Separate Adjustable Strap That Must Be Fed Through The Buckle Before Tightening
- Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
- 3 Inch Flat Sewn Loop On The End Of Both The Fixed End And Adjustable Strap
- Flat Sewn Loops Are Formed By Folding The Webbing Flat Over On Top Of Itself, There Is No Twisting, Narrowing Or Pinching Of The Webbing
- The 3 Inch Length Is Measured When The Loop Is Lying Flat, It Is Equivalent To Approximately 1/2 The Circumference
- The 3 Inch Loop Can Fit Over A 1.75 Inch Diameter Round Bar
- Adjustable Strap Has An Angle Cut Loose End To Make Feeding The Strap Through The Buckle Easier
- Cinch Style Cam Buckle Has The Is Fed From The Bottom Side Of The Buckle Up Through The Teeth And Pull From The Top Side Of The Buckle
- Cam Buckle Frame Is Made Of Zinc-diecast Material And Has A Black Resin Finish
- Strap Is Made With Heavyweight Polypropylene Webbing
- Sewn With Black Polyester Thread
- Strap Lengths Are Measured As The Webbing Portion Only Including The Length Of The Loop, The Cam Buckle Is Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- Sewn With The Compact Tie-down Stitch
- CTD Strap Warning Tag Sewn Next To The Sewn Loop On The End Of The Adjustable Strap
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW1-R8PP | 1 Inch Heavyweight Red Polypropylene Webbing | 800 lb | 267 lb |
| CS1K-1M | 1 Inch Black Zinc Diecast Cam Buckle | 1,300 lb | 433 lb |
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Available Product Variations
Browse the default product for each available product type in this family. Color, length, and material can be adjusted on the product page.
PRODUCT MODELING
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 3 arrow_forward Config = 3918 arrow_forward Family = 3945 arrow_forward Type = 11159
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 3 arrow_forward Config = 3918 arrow_forward Family = 3945 arrow_forward Type = 11159
