Details:
- 1 Inch Strap Extender
- CFBP1K-3M Black Angled Bolt Plate, bend angle up, on one end, Bend angle down on the opposite end
- Total Strap Length 2 Ft (24 Inches)
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
- 2500 lb Break Strength
- 833 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.2 lb
$8.89 Each
10+ = $8.03
50+ = $7.24
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, Bolt Plate On Both Ends
- Strap Extender Configuration, Bolt Plate On Both Ends. Strap Extenders Are Sewn In A Specific Length, There Is No Buckle Or Method Of Tightening
- The Bolt Plates Have A Slight Bend In The Frame
- The Bolt Plate On One End Is Orientated, Bend Angle Up. The Bolt Plate On The Opposite End Is Orientated Bend Angle Down
- Heavy Duty Bolt Plates For The Highest Strength And Durability
- Bolt Plates Are Made Of Steel And Have A Black Resin Finish
- CFBP1 Series Bolt Plates Have A Slight Angled Bend In The Frame And Are Designed To Be Mounted With A 1/2 Inch Bolt
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- The Strap Length Is Measured Center Of The Bolt Hole To Center Of The Opposite Bolt Hole
- Sewn In The Standard Method To Mee The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On One End Next To A Bolt Plate
- Product Is Not A Sling Nor Rated For Use As A Sling. Do Not Use For Lifting Or Personal Restraint.
Variations of Product Type 11012
There are no variations of Product Type 11012 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
