Details:
- 1 Inch Cam Buckle Tie Down
- CB1-1M 1 Inch Cam Buckle, Zinc-Yellow
- 3 inch Sewn Loop with 1/2 twist on both ends, Adjustable strap has a sewn-in pull loop
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.55 lb
$9.29 Each
10+ = $8.36
50+ = $7.54
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, Sewn Loop With 1/2 Twist On Both Ends
- One Piece Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And An Adjustable Strap Permanently Fed Through The Buckle To Prevent Removal
- Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
- Product Has A Sewn-in Pull Loop On Adjustable Strap To Make Tightening Easier
- 3 Inch Sewn Loop With A Half Twist On The End Of Both The Fixed End And Adjustable Strap
- Sewn Loop With Half Twist Is Formed By Folding Over The Webbing And Twisting The Webbing Over One Time, Then Sewn. The Half Twist Orientates The The Loop Perpendicular From The Webbing Lying Flat
- The Loop Is Not Pinched Or Narrowed, Only 1/2 Twisted. The Tip Of The Loop Is Still The Same Width As The Webbing
- The 3 Inch Length Is Measured When The Loop Is Lying Flat, It Is Equivalent To Approximately 1/2 The Circumference
- The 3 Inch Loop Can Fit Over A 1.75 Inch Diameter Round Bar
- Utility Style Cam Buckle Is Designed For The Webbing To Be Pre-installed During Production, Fed From The Bottom Middle Frame Opening And Through The Cam Teeth
- Cam Buckle Frame Is Made Of Steel And Has A Zinc-yellow Plated Finish. The Cam Trigger Has A Zinc-silver Plating.
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Portion Only Including The Length Of The Loop, The Cam Buckle Is Not Included In The Measurement
- Sewn In The Standard Method To Meet Listed Strength Rating
- Sewn With The Standard Stitch
- CTD Strap Warning Tag Sewn Next To The Sewn Loop On The End Of The Adjustable Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 1091
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 1704 | Buckle Has A Black Resin Finish |
