


Details:
- 1 Inch Ratchet Strap
- CRW1-3M 1 Inch Ratchet With Wide Handle
- CHSHMI75N-3M Snap Hook on fixed end, CHO2-10 Wire O Ring on Adjustable strap
- Fixed End 1 Ft (12 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 6 Ft (72 Inches)
- CW1-WC3PE 1 Inch 3M White Polyester Tie-Down Webbing With Clear Coat
- 2500 lb Break Strength
- 833 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.62 lb
$17.09 Each
10+ = $15.49
50+ = $13.98
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
SPECIAL WARNINGS:
- Tie-downs, Ratchet Strap, Twisted Snap Hook On One End, O-ring On The Opposite End
- Two Part Ratchet Strap, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Ratchet Spindle And Tightened During Use
- Twisted Snap Hook Is Sewn On The End Of The Fixed End Strap
- Twisted Snap Hook Is Orientated, Hook Facing Down, Relative To The Buckle Lying Flat
- Twisted Snap Hook Has A Built In Retainer Clip To Help Prevent Disconnects
- O-ring Is Sewn On The End Of The Adjustable Strap
- This Product Is Commonly Used As An Auto Tie-Down, Most Commonly, One Tie-down Per Tire Are Used, 4 Tie-downs Per Vehicle
- When Used As An Auto Tie-down, The Flat Hook On The Fixed End Is Hooked Into The Rail Or Pocket On The Trailer. The Adjustable Strap Goes Around Tire, Feeds Back Through The O-ring And Into The Ratchet To Make A Lasso Around Tire, Then Tightened
- Heavy Duty Ratchet For The Highest Strength And Durability
- Ratchet Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Ratchet Has A Standard Single Locking Configuration For The Easiest Ratcheting Operation
- Ratchet Has A Wide Handle Ratchet To Make Operation Easier While Wearing Gloves
- Heavy Duty Malleable Iron Twisted Snap Hook For The Highest Strength And Durability
- Snap Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
- Heavy Duty O-ring For The Highest Strength And Durability
- O-ring Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As Only The Webbing Portion, Buckle And Hooks Are Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- Product Is A Special Combination Of 1 Inch Webbing With A 2 Inch O-ring
- CustomTieDowns Strap Warning Tag Sewn On The D-ring End Of The Adjustable Strap
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW1-WC3PE | 1 Inch 3M White Polyester Tie-Down Webbing With Clear Coat | 3,000 lb | 1,000 lb |
| CHO2-10M | 2 Inch 10M Wire O-Ring, Zinc-Yellow | 10,000 lb | 3,333 lb |
| CHSHMI75N-3M | Malleable Iron Nickel Plated Snap Hook | 5,000 lb | 1,667 lb |
| CRW1-3M | 1 Inch Ratchet With Wide Handle | 3,300 lb | 1,100 lb |
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Available Product Variations
There are no additional product variations currently available.
For help finding another option, contact customer service at sales@customtiedowns.com or 1-877-360-5528.
PRODUCT MODELING
Top = 1 arrow_forward Group = 1 arrow_forward Layout = 481 arrow_forward Config = 948 arrow_forward Family = 4439 arrow_forward Type = 10750
Top = 1 arrow_forward Group = 1 arrow_forward Layout = 481 arrow_forward Config = 948 arrow_forward Family = 4439 arrow_forward Type = 10750