Details:
- 1 Inch Double Ratchet Tie-Down
- No Strap Tag
- Endless Loop Strap on the Fixed end, CHJ1-3M Double J Wire Hook, hook facing down, with sliding CHD1-3M D Ring on the adjustable strap
- Fixed End 6 Ft
- Adjustable Strap 6 Ft
- Total Strap Length 12 Ft (144 Inches)
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
- 2500 lb Break Strength
- 833 lb Working Load Limit
- Assembled in the USA
Product Weight: 2.21 lb
$18.09 Each
10+ = $16.39
50+ = $14.79
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
SPECIAL WARNINGS:
- Tie-downs, Double Ratchet Tie-down, No End Fitting On One End, Combo D-ring With J Hook On Opposite End
- Two Part Double Ratchet Strap, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Double Buckle Side And Is Fed Thru A Ratchet Spindle And Tightened During Use
- The Double Buckle Configuration Is Created By Sewing Two Ratchets Back To Back With A Short Strap So That Both Ratchet Spindles Can Be Used
- Fixed End Is Configured As An Endless Loop Strap Where The Strap Is Wrapped Around An Anchor Point And Fed Through A Ratchet To Be Tightened
- The Adjustable Strap Has A Combination Doubele J Hook And Sliding D-ring
- The Sliding D-rings Can Be Adjusted Up And Down The Strap
- Most Commonly, The J Hook End Is Wrapped Around An Anchor Point, Then The J Hook Is Hooked Into The D-ring And The Strap Is Tightened. The J Hook To D-ring Combination Allows The Strap To Tighten Around The Anchor Point In A Slip Knot Style Action
- Heavy Duty Ratchets For The Highest Strength And Durability Available In The 1 Inch Size
- Ratchets Are Made Of Steel And Have A Zinc-yellow Plated Finish For Superior Weather Protection
- Ratchet Has The Standard Single Locking Configuration
- Ratchet Has A Wide Handle That Makes Operation Easier While Wearing Gloves
- J Hooks And D-rings Are The Heavy Duty Version For The Highest Strength And Durability
- Double J Hooks Are Made Of Steel And Have A Zinc-yellow Plated Finish For Superior Weather Protection
- J Hooks Are The Standard Double J Configuration. The Width Of The Hook Tip Is 0.58 Inch
- D-rings Are Made Of Steel And Have A Zinc-yellow Plated Finish For Superior Weather Protection
- D Ring Is Formed Out Of Wire And Welded Along The Flat Side Of The D-shape
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured As The Webbing Portion Only, The Buckle And Hooks Are Not Included In The Measurement
- Sewn In The Standard Method To Meet The Provided Strength Rating
- Small Strap Sewn Between Ratchets Measures Approximately 3 Inches
- No Strap Tag Or Labeling On The Product
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW1-Y3PE | 1 Inch 3M Yellow Polyester Tie-Down Webbing | 3,000 lb | 1,000 lb |
| CHD1-3M | 1 Inch 3M Wire D Ring | 3,000 lb | 1,000 lb |
| CRW1-3M | 1 Inch Ratchet With Wide Handle | 3,300 lb | 1,100 lb |
| CHJ1-3M | 1 Inch 3M Double J Wire Hook, Zinc-Yellow | 3,000 lb | 1,000 lb |
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Available Product Variations
There are no additional product variations currently available.
For help finding another option, contact customer service at sales@customtiedowns.com or 1-877-360-5528.
PRODUCT MODELING
Top = 1 arrow_forward Group = 53 arrow_forward Layout = 333 arrow_forward Config = 4147 arrow_forward Family = 4298 arrow_forward Type = 10192
Top = 1 arrow_forward Group = 53 arrow_forward Layout = 333 arrow_forward Config = 4147 arrow_forward Family = 4298 arrow_forward Type = 10192
