Details:
- 1 Inch Cam Buckle Tie Down
- No Strap Tag, Sewn With White Polyester Thread
- CS1-1M 1 Inch Zinc Diecast Cam Buckle
- CHD1-3M D-Ring on each end, No Pull Loop
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW1-W2FPE 1 Inch 2M White Flat Polyester Webbing
- 1000 lb Break Strength
- 333 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.38 lb
$9.29 Each
10+ = $8.36
50+ = $7.54
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, D-ring On Both Ends
- Two Piece Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And An Adjustable Strap That Is Separate And Is Fed Through The Buckle To Be Tightened
- Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
- Cinch Style Cam Buckle Must Have The Loose End Of The Adjustable Strap Fed Through The Teeth From Bottom To Top To Properly Hold Tight, Never Feed From Top To Bottom
- D-ring Sewn On The End Of Both The Fixed End And End Of Adjustable Strap
- Cinch Style Buckle Has The Cinch Cambuckle Configuration Where The Strap Is Fed Bottom Of Buckle Thru Top Of Buckle And Pulled Tight
- Cam Buckle Is Made Of Rust Free Zinc-diecast Material And Has A Silver Color Finish
- D-rings Are Heavy Duty For The Highest Strength And Durability
- D-rings Are Made Of Steel And Have A Zinc-yellow Plated Finish For Superior Weather Protection
- D-rings Are Made Of Metal Wire And Bent Into The Shap Of The Letter D. There Is A Small Weld Point On The Flat Side Of The D Where The Wire Ends Meet
- Strap Is Made With 2000 Lb Flat Polyester Webbing
- Sewn With White Polyester Thread
- Strap Lengths Are Measured As The Webbing Portion Only, The Cam Buckle And Rings Are Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- Sewn With The Smallest Tie-down Stitch
- No Strap Tag Or Labeling On The Product
- No Instruction Sheet Included
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 10174
There are no variations of Product Type 10174 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
PRODUCT MODELING
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 94 arrow_forward Config = 4142 arrow_forward Family = 4292 arrow_forward Type = 10174
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 94 arrow_forward Config = 4142 arrow_forward Family = 4292 arrow_forward Type = 10174
