1 INCH THREE POINT TIE-DOWNS

• Tie-downs, 3 Point Tie-down, O-ring In Middle With Flat Sewn Loop On One End, S Hook With Retainer Clip On The Other Ends, O-ring In The Middle
• 3 Point Cambuckle Tie-down, Also Called A Y-strap For Its Shape, Allows The Operator To Anchor The Tie-down In Three Locations For Added Securement
• Each Leg Of The 3-point Tie-down Has S A Cam Buckle For Easy Length Adjustment And Tightening
• Cam Buckles Are Tightened By Hand. A Pull Loop Is Sewn On The Adjustable Strap To Make Tightening Easier
• O-ring In The Middle Of The Tie-down To Allow For Postion Adjustment Of Each Leg Of The Tie-down
• One Strap Has A 5 Inch Flat Sewn Loop On One End, The Other Two Straps Have An S-hook With Retainer Clip
• The 5 Inch Flat Loop Is Formed By Folding Over The Webbing Flat Onto Itself And Sewn, No Twisting, Pinching Or Narrowing Of The Webbing
• 5 Inch Flat Loop Has A 10 Inch Circumference And Can Comfortably Fit Over A 3 Inch Diameter Round Bar
• S Hook With Retainer Clip Provides Extra Security Once Latched To Help Prevent The Hook From Unintentionally Disconnecting From The Anchor Point
• Utility Style Cam Buckle Is Designed For The Webbing To Feed From The Middle Opening On The Bottom Of The Frame And Back Out The Front Through The Teeth The Cam. This Buckle Is Intended For The Strap To Remain Through The Buckle. This Product Has Sewn-in Pull Loops To Prevent The Adjustable Straps From Being Removed From The Buckles
• Cam Buckles Are Made Of Steel And Have Zinc-yellow Plating For Superior Weather Protection
• 1M S Hook With Retainer Clip Has A Material Clearance Of 0.35 Inches When The Retainer Clip Is At Its Lowest Point Inside The Hook Opening. Make Sure Your Connection Point Will Allow The Retainer Clip To Fully Engage
• S Hooks Are Made Of Steel And Have A Black Vinyl Coating To Help Prevent Them From Scratching Their Surroundings. They Have A Spring Load Retainer Clip That Is Plated In Zinc-silver Finish
• Strap Is Made With 3000 Lb Polyester Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As The Webbing Portion Only, Including The Length Of The Flat Sewn Loop On One Strap. The Buckles, S Hooks And O-ring In The Middle Are Not Included In The Measurements
• Sewn In The Standard Method To Meet The Provided Strength Rating
• CustomTieDowns Strap Warning Tag Sewn On End Of One Strap Near The Sewn Loop