1 INCH GROMMET STRAPS

• Tie-downs, Spring Buckle Tie-down, Grommet On Both Ends
• Spring Buckle Tie-Down Configuration, Made Up Of A Fixed End And Adjustable Strap With A Grommet Installed At Each End
• Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Spring Buckle And Tightened
• Spring Buckles Are Operated By Inserting The Adjustable Strap Through The Teeth From Underneath, Up Through The Teeth And Out The Top Of The Buckle
• Spring Buckles Do Not Have A Mechanical Tightening System, They Must Be Pulled Tight By Hand
• A Grommet Is Installed On The End Of Both The Fixed End Strap And Adjustable Strap
• Each Grommet Is Positioned So The Center Of The Grommet Is 3/4 (0.75) Inch From The End Of The Strap End Of The Strap
• Spring Buckles Are Intended For General And Light Commercial Applications
• Spring Buckle Is Made Of Steel And Has A Nickel Plated Finish That Has A Silver Color Appearance
• Size #0 Grommet Installed On Both The Fixed And Adjustable Straps. Size #0 Grommets Have An Inside Diameter Of 1/4 (0.25) Inch
• The Grommets Are Made Of Brass And Have The Brass/bronze Color Finish
• Strap Is Made With Heavyweight Polypropylene Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured Tip To Tip Of The Webbing, The Buckle Is Not Included In The Measurement
• Sewn In The Standard Method To Meet The Provided Strength Rating
• No Strap Tag Or Label On The Product. Not Labeled For D.O.T. Applications