1 INCH CAM BUCKLE TIE DOWNS

• Tie-downs, Cam Buckle Tie-down, Flat Sewn Loop On Both Ends
• One Piece Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And An Adjustable Strap Permanently Fed Through The Buckle To Prevent Removal
• Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
• Product Has A Sewn-in Pull Loop On Adjustable Strap To Make Tightening Easier
• 5 Inch Flat Sewn Loop On The End Of Both The Fixed End And Adjustable Strap
• Flat Sewn Loops Are Formed By Folding The Webbing Flat Over On Top Of Itself, There Is No Twisting, Narrowing Or Pinching Of The Webbing
• The 5 Inch Length Is Measured When The Loop Is Lying Flat
• The 5 Inch Loop Has A Circumference Of 10 Inches And Can Fit Over A 3 Inch Diameter Bar
• Utility Style Cam Buckle Is Designed For The Webbing To Be Pre-installed During Production, Fed From The Bottom Middle Frame Opening And Through The Cam Teeth
• Cam Buckle Frame Is Made Of Steel And Has A Zinc-yellow Plated Finish. The Cam Trigger Has A Zinc-silver Plating
• Strap Is Made With 3000 Lb Polyester Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As The Webbing Portion Only Including The Length Of The Loop, The Cam Buckle Is Not Included In The Measurement
• Sewn In The Standard Method To Meet Provided Strength Rating
• Sewn With The Standard Stitch
• CustomTieDowns Strap Warning Tag Sewn Next To The Sewn Loop On The End Of The Adjustable Strap