Email Support: Sales@CustomTieDowns.com | Customer Phone Support: 1-877-360-5528  
CustomTieDowns.com
Total:  View Shopping Cart

RACK-STRAP TIE DOWNS


PRODUCT NUMBER : 8722
  $49.99 per each
PRODUCT MODEL:  RS2K-Y8J-B
   
DESCRIPTION:
Rack-Strap RS2K, 1-7/8 Inch O.D. Round Mounting Bracket, Black Powdercoated Frame, Bolt Mounting Hardware Included, Zinc-Yellow Hardware, Double J Hook On End Of Strap, Total Strap Length 8 Ft, CW15-Y4PE 1.5 Inch 4M Yellow Polyester Tie-Down Webbing, Made In The USA.



STRENGTH RATING : 
BREAKING STRENGTH1500 lb ||  WORKING LOAD LIMIT500 lb
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528

 
CUSTOM IMPRINT
Change Webbing Color:
SEE ALL VARIATIONS OF PRODUCT 8722


PRODUCT NOTES:
  • Rack-strap, Rack-strap Tie-down, J Hook On One End
  • Rack-Strap Tie-Down, Mountable Ratchet Strap For Truck And Van Ladder Racks
  • Mounting Bracket Can Be Bolted Or Welded Directly To The Ladder Rack So The Tie-down Permanently Mounted And Always Ready For Use
  • For Proper Use, The Strap Is Pulled Out From The Spool, Fed Under The Ladder Or Cargo, Brought Back Over The Cargo Untill The Hook Reaches Back To The Rack-Strap Frame. The Hook Is Then Connected To The Frame On The Front Pin And Ratcheted Tight
  • Rack-Strap Offers Two Tightening Options, The Provided Tightening Rod Or 1/2 Inch Nut On The End Of The Drive Axle
  • The Black Knob Is Provided As A Method Of Winding Up The Loose Strap Or Removing Any Slack, But Never Use The Knob To Tighten The Tie-down
  • Rack-strap 1-7/8 Inch Round Mounting Bracket Is Designed To Mount To Ladder Racks Made Of 1-7/8 Inch Round Pipe. To Be Sure On The Correct Bracket, Measure The Outside Diameter Of The Mounting Location On The Ladder Rack To Determine Which Size Round Bracket Will Fit
  • Rack-strap Frame Is Made Of Steel And Has A Black Powdercoat Finish
  • J Hook On The End Of The Strap Is The Double J Configuration And Has A Special Back Bend To Fit The Rack-Strap Frame
  • Double J Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
  • All Attached Rack-Strap Hardware Has A Zinc-yellow Plated Finish
  • Strap Is Made With 4500 Lb Polyester Tie-down Webbing
  • Sewn With Silver Polyester Thread
  • Strap Length Is Measured As The Total Maximum Length When The Strap Is Fully Extended From The Frame
  • Sewn In The Standard Method To Meet The Provided Strength Rating
  • Rack-Strap Brand Strap Warning Label Sewn On The Hook End Of The Strap
  • Includes The Bolt Mounting Kit For Installation


PRODUCT WARNINGS:


ADDITIONAL IMAGES (Strap Color May Not Match)


Assembled By: Rack-Strap, Inc.
Product Weight: 3.06 lb per each
2021-08-02
Variations of Product Type 8722

**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.

Variation ID Variation Difference
7491 Buckle Has A Zinc-Yellow Plated Finish