Email Support: Sales@CustomTieDowns.com | Customer Phone Support: 1-877-360-5528  
CustomTieDowns.com
Total:  View Shopping Cart

RACK-STRAP TIE DOWNS


PRODUCT NUMBER : 6635
  $49.99 per each
PRODUCT MODEL:  RSL1KZ-K8J-B
   
DESCRIPTION:
Rack-Strap RSL1K, Low Profile Right Angle Mounting Bracket, Black Powdercoated Frame, Bolt Mounting Hardware Included, Zinc-silver Hardware, Double J Wire Hook On End Of Strap, Total Strap Length 8 Ft, CW15-K4PE 1.5 Inch 4M Black Polyester Tie-Down Webbing, Made In The USA.



STRENGTH RATING : 
BREAKING STRENGTH1500 lb ||  WORKING LOAD LIMIT500 lb
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528

 
Change Webbing Color:
SEE ALL VARIATIONS OF PRODUCT 6635


PRODUCT NOTES:
  • Rack-strap, Rack-strap Tie-down, J Hook On One End
  • Rack-Strap Tie-Down, Mountable Ratchet Strap For Truck And Van Ladder Racks
  • Mounting Bracket Can Be Bolted Or Welded Directly To The Ladder Rack So The Tie-down Permanently Mounted And Always Ready For Use
  • For Proper Use, The Strap Is Pulled Out From The Spool, Fed Under The Ladder Or Cargo, Brought Back Over The Cargo Untill The Hook Reaches Back To The Rack-Strap Frame. The Hook Is Then Connected To The Frame On The Front Pin And Ratcheted Tight
  • Rack-Strap Offers Two Tightening Options, The Provided Tightening Rod Or 1/2 Inch Nut On The End Of The Drive Axle
  • The Black Knob Is Provided As A Method Of Winding Up The Loose Strap Or Removing Any Slack, But Never Use The Knob To Tighten The Tie-down
  • Rack-Strap Mounting Bracket Is The Low Profile Right Angle Configuration That Fits Square Or Rectangular Tubing That Is 1 X 1 Inch Or Greater. Low Profile Is Designed To Fit Ladder Racks Where Clearance Between The Rack And Top Of The Vehicle Is Limited, Such As Mounting Over A Door Or Tool Box
  • Rack-strap Frame Is Made Of Steel And Has A Black Powdercoat Finish
  • J Hook On The End Of The Strap Is The Double J Configuration And Has A Special Back Bend To Fit The Rack-Strap Frame
  • Double J Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
  • All Attached Rack-Strap Hardware Has A Zinc-silver Plated Finish
  • Strap Is Made With 4500 Lb Polyester Tie-down Webbing
  • Sewn With Silver Polyester Thread
  • Strap Length Is Measured As The Total Maximum Length When The Strap Is Fully Extended From The Frame
  • Sewn In The Standard Method To Meet The Provided Strength Rating
  • Rack-Strap Brand Strap Warning Label Sewn On The Hook End Of The Strap
  • Includes The Bolt Mounting Kit For Installation


PRODUCT WARNINGS:


ADDITIONAL IMAGES (Strap Color May Not Match)


Assembled By: Rack-Strap, Inc.
Product Weight: 1.87 lb per each
2021-08-03
Variations of Product Type 6635

There are no variations of Product Type 6635 currently available.

If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com

or Call customer service at 1-877-360-5528, M-F during business hours.