Email Support: Sales@CustomTieDowns.com | Customer Phone Support: 1-877-360-5528  
CustomTieDowns.com
Total:  View Shopping Cart

RACK-STRAP TIE DOWNS


PRODUCT NUMBER : 3037
  $49.99 per each
PRODUCT MODEL:  RS4K-K8J-B
   
DESCRIPTION:
Rack-Strap RS4K, 1-5/8 Inch O.D. Round Mounting Bracket, Black Powdercoated Frame, Bolt Mounting Hardware Included, Zinc-Yellow Hardware, Double J Wire Hook On The End, Total Strap Length 8 Ft, CW15-K4PE 1.5 Inch 4M Black Polyester Tie-Down Webbing, Made In The USA.



STRENGTH RATING : 
BREAKING STRENGTH1500 lb ||  WORKING LOAD LIMIT500 lb
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528

 
Change Webbing Color:
SEE ALL VARIATIONS OF PRODUCT 3037


PRODUCT NOTES:
  • Rack-strap, Rack-strap Tie-down, J Hook On One End
  • Rack-Strap Tie-Down, Mountable Ratchet Strap For Truck And Van Ladder Racks
  • Mounting Bracket Can Be Bolted Or Welded Directly To The Ladder Rack So The Tie-down Permanently Mounted And Always Ready For Use
  • For Proper Use, The Strap Is Pulled Out From The Spool, Fed Under The Ladder Or Cargo, Brought Back Over The Cargo Untill The Hook Reaches Back To The Rack-Strap Frame. The Hook Is Then Connected To The Frame On The Front Pin And Ratcheted Tight
  • Rack-Strap Offers Two Tightening Options, The Provided Tightening Rod Or 1/2 Inch Nut On The End Of The Drive Axle
  • The Black Knob Is Provided As A Method Of Winding Up The Loose Strap Or Removing Any Slack, But Never Use The Knob To Tighten The Tie-down
  • Rack-strap 1-5/8 Inch Round Mounting Bracket Is Designed To Mount To Ladder Racks Made Of 1-5/8 Inch Round Pipe. To Be Sure On The Correct Bracket, Measure The Outside Diameter Of The Mounting Location On The Ladder Rack To Determine Which Size Round Bracket Will Fit
  • Rack-strap Frame Is Made Of Steel And Has A Black Powdercoated Frame
  • J Hook On The End Of The Strap Is The Double J Configuration And Has A Special Back Bend To Fit The Rack-Strap Frame
  • Double J Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
  • All Attached Rack-Strap Hardware Has A Zinc-yellow Plated Finish
  • Strap Is Made With 4500 Lb Polyester Tie-down Webbing
  • Sewn With Silver Polyester Thread
  • Strap Length Is Measured As The Total Maximum Length When The Strap Is Fully Extended From The Frame
  • Sewn In The Standard Method To Meet The Provided Strength Rating
  • Rack-Strap Brand Strap Warning Label Sewn On The Hook End Of The Strap
  • Includes The Bolt Mounting Kit For Installation


PRODUCT WARNINGS:


ADDITIONAL IMAGES (Strap Color May Not Match)

Assembled By: Rack-Strap, Inc.
Product Weight: 3.10 lb per each
2021-06-14
Variations of Product Type 3037

**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.

Variation ID Variation Difference
5448 Bolt Kit Mounting Hardware Not Included