MARCH MADNESS PROMO: FREE SHIPPING OVER $64, CODE: madness64 (click for info)
Email Support: Sales@CustomTieDowns.com | Customer Phone Support: 1-877-360-5528  
CustomTieDowns.com
Total:  View Shopping Cart

BOAT WINCH STRAPS - 1.5 INCH


PRODUCT NUMBER : 7111
  $16.29 per each
PRODUCT MODEL:  7111-G16
   
DESCRIPTION:
1.5 Inch Strap, 1 Inch Flat Sewn Loop On One End, CHTH-10M Forged Snap Hook With 18 Inch Soft Loop Extension On The Opposite End, Total Strap Length 16 Ft, CW15-G4PE 1.5 Inch 4M Gray Polyester Tie-Down Webbing, Assembled In The USA.



Quantity Discounts:
10 - 49 = $14.66
50+ = $13.19
STRENGTH RATING : 
BREAKING STRENGTH3000 lb ||  WORKING LOAD LIMIT1,000 lb
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
Change Strap Length (feet):
Need smaller length increments, call 1-877-360-5528
or email: sales@customtiedowns.com

 
CUSTOM IMPRINT
Change Webbing Color:
SEE ALL VARIATIONS OF PRODUCT 7111


PRODUCT NOTES:
  • Tie-downs, Strap Extender, Flat Sewn Loop On One End, Snap Hook With Flat Sewn Loop On Opposite End
  • Boat Winch Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
  • 1 Inch Flat Loop On The End Of The Strap Can Be Attached To A Bolt Or To The Pin Inside A Boat Winch. 1 Inch Flat Loop Can Fit Over A 1/2 Inch (0.50) Inch Diameter Bolt Or Pin
  • The Snap Hook Has A Spring Loaded Keeper To Prevent Unintentional Disconnects After Attachment
  • Eighteen Inch Soft Loop Extension Beyond Snap Hook Goes Thru Connection Point And Returns To Snap Hook To Create A Loop
  • 10M Forged Snap Hook Is The Heavy Duty Version Of The Hook And Is Slightly Thicker Than The Corresponding Flat Snap Hook
  • Forged Snap Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
  • Strap Is Made With 4500 Lb Polyester Tie-down Webbing. Webbing Nominal Thickness Is 0.65 Inch (1.6mm)
  • Sewn With Silver Polyster Thread
  • Strap Length Is Measured As The Webbing Portion Only Including The Flat Sewn Loop, The Hook Is Not Included In The Measurement
  • Sewn In The Standard Method To Meet Provided Strength Rating
  • CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Strap


PRODUCT WARNINGS:
  • If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up
Assembled By: CustomTieDowns.com
Product Weight: 1.24 lb per each
2023-01-30
Variations of Product Type 7111

There are no variations of Product Type 7111 currently available.

If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com

or Call customer service at 1-877-360-5528, M-F during business hours.