TRANSOM TIE DOWNS - 2 INCH
PRODUCT NUMBER : 1859
|
|
|
$36.59 per each |
PRODUCT MODEL: |
1859-BD4.5-0.50 |
|
|
|
|
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528 |
Change Fixed End Strap Length (feet): |
|
|
Change Adjustable Strap Length (feet): |
|
|
|
|
|
CUSTOM IMPRINT
|
|
SEE ALL VARIATIONS OF PRODUCT 1859
|
PRODUCT NOTES:
- Tie-downs, Quick Release Tie-down, S Hook On One End, Bolt Plate On Opposite End
- Two Part Quick Release Configuration, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle And Is Fed Thru The Buckle, Then Tightened
- Quick Release Buckles, Also Called Flip Buckles, Snap Closed By Flipping The Buckle Over. Proper Feeding And Operation Is Necessary For The Buckle To Hold The Webbing
- A Protective Pad Is Sewn Under The Buckle To Help Prevent The Buckle From Scratching Its Surroundings
- Protective Pad Has A Sewn On Hook And Loop Strap That Wraps Around The Buckle To Hold It Closed And To Hold Excess Webbing
- S Hook Sewn On The End Of The Fixed End Strap
- Bolt Mounting Plate Sewn On The End Of The Adjustable Strap Has A Slight Bend. The Bend In The Bolt Plate Is Orientated, Bend Angle Up, Relative To The Buckle Lying Flat
- This Product Is Commonly Used As A Transom Strap For Securing The Back End Of A Boat
- Quick Release Buckle Has Two Webbing Slots And A Wire Bale On The Back. Check Operating Instructions To Properly Feed The Buckle
- Quick Release Buckle Is Made From 304 Grade Stainless Steel
- 1M Series S Hook Is A Versatile Hook With A Hook Opening Diameter Of 1.1 Inch. The Hook Is Designed To Fit Over A 1 Inch Round Pipe Or Rod, Such As A Handlebar
- S Hook Is Made From 304 Grade Stainless Steel
- Bolt Plate On The Adjustable Strap Can Be Mounted With Up To A 5/8 Inch Diameter Bolt
- Bolt Plate Is Made From 304 Grade Stainless Steel
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As Only The Webbing Portion, Buckle And Hooks Are Not Included In The Measurement
- Product Is Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Hook End Of Both The Fixed End And The Adjustable Strap
|
|
|
INCLUDES (COMPONENTS & DETAILS): (Links below open a new window)
|
|
Assembled By: CustomTieDowns.com |
|
Product Weight: 1.24 lb per each |
|
2023-01-30
|
Variations of Product Type 1859
There are no variations of Product Type 1859 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.