2 INCH ENDLESS LOOP TIE DOWNS

• Tie-downs, Cam Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
• Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Wrapped Around The Cargo And The Loose End Is Fed Back Thru The Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
• Cam Buckles Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
• This Product Is Built Using A Utility Style Cam Buckle, Which Is The Stronger Cam Buckle Style, But Means The Loose End Of The Strap Must Be Fed Through The Teeth From Back To Front For Proper Operation
• End Of The Strap Is Angle Cut To Make Feeding The Strap Thru The Buckle Easier
• Commercial Duty Cam Buckle For Great Strength And Durability
• Cam Buckle Is Made Of Steel And The Frame Has A Zinc-yellow Plated Finish. The Cam Trigger Has A Zinc-silver Plated Finish
• Strap Is Made With 6000 Lb Polyester Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As The Webbing Only, The Buckle Is Not Included In The Length
• Sewn In The Standard Method To Meet The Provided Strength Rating
• CTD Strap Warning Tag Sewn On The Strap Next To The Buckle

• Utility Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Back Through The Front In Order To Properly Hold The Strap After Tightening. The Strap Can Be Loaded From The Middle Opening On The Bottom Of The Buckle And Fed Through The Teeth Back To Front Also. NEVER Load The Strap Through The Cam Teeth From Front To Back, It Will Not Hold To The Proper Strength