1 INCH ENDLESS LOOP TIE DOWNS

• Tie-downs, Cam Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
• Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Wrapped Around The Cargo And The Loose End Is Fed Back Thru The Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
• Cam Buckles Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
• End Of The Strap Is Angle Cut To Make Feeding The Strap Thru The Buckle Easier
• Protective Pad Made Of Webbing Sewn Under The Buckle To Help Prevent The Buckle From Scratching Its Surroundings
• Adjustable 3-bar Slide On The Strap To Use Holding The Excess Strap After Tightening
• Cinch Style Cam Buckle Is Fed From Below The Buckle, Up Through The Teeth And Pulled Tight. Never Feed The Strap From The Top Down
• Cinch Cam Buckle Is Made From Zinc-Diecast Metal And Has A Zinc-silver Finish. Zinc-Diecast Buckles Are Rust Proof
• 3-bar Slide Is Made Of Black Plastic
• Strap Is Made With 3000 Lb Polyester Tie-down Webbing. Protective Pad Is Made From Heavyweight Polypropylene Webbing
• Sewn With Silver Polyester Thread
• Strap Length Measured As The Webbing Portion Only, The Buckle Is Not Included In The Measurement
• Sewn In The Standard Manner To Meet The Provided Strength Rating
• CustomTieDowns Strap Warning Label Sewn On The Product Next To The Buckle

• Cinch Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Bottom To Top In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Cam Teeth From Top To Bottom, It Will Not Hold To The Proper Strength