BOAT WINCH STRAPS - 2 INCH

• Tie-downs, Boat Winch Strap, Narrowed Sewn Tip On One End, Snap Hook With Flat Sewn Loop On Opposite End
• Boat Winch Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
• Narrowed Sewn Tip Is A Sewing Style That Reduces The Width Of The Webbing In Half
• The Narrowed Sewn Tip Is Narrowed For A Length Of 12 Inches On This Strap
• The Narrowed Sewn Tip Is Used In Boat Winches That Have A Slotted Attachment Point For The Strap Rather Than The Standard Pin Configruation
• The Snap Hook Has A Spring Loaded Keeper To Prevent Unintentional Disconnects After Attachment
• Eighteen Inch Soft Loop Extension Beyond Snap Hook Goes Thru Connection Point And Returns To Snap Hook To Create A Loop
• 10M Forged Snap Hook Is The Heavy Duty Version Of The Hook And Is Slightly Thicker Than The Corresponding Flat Snap Hook
• Forged Snap Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
• Strap Is Made With Extra Heavy Duty 12000 Lb Polyester Tie-down Webbing. Webbing Nominal Thickness Is 0.08 Inch (2mm)
• Sewn With White Polyster Thread
• Strap Length Is Measured As The Webbing From The Tip Of The 12 Inch Narrowed Sewn Tip To The Snap Hook, The Hook And The Soft Loop Extension Is Not Included In The Strap Length Measurement
• Sewn In The Standard Method To Meet Provided Strength Rating
• Narrowed Sewn Tip Reduces The Width Of The Strap From 2 Inches To 1 Inch For A Length Of 12 Inches
• CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Strap

• If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up