1.5 INCH STRAP EXTENDERS

• Tie-downs, Strap Extender, Flat Sewn Loop On One End, Bolt Plate On The Opposite End
• Strap Extender Configuration, Flat Sewn Loop On One End, Angled Bolt Plate On The Opposite End
• Strap Extenders Have No Tightening Or Adjustability Mechanism, They Are Sewn To A Specific Length
• Flat Sewn Loop Is Formed By Folding The Strap Over Flat On Top Itself, There Is No Twisting, Pinching Or Narrowing Of The Strap
• The Sewn Loop Measures 12 Inches Long When Laid Flat. A 12 Inch Flat Loop Has A Circumference Of 24 Inches And Can Comfortably Fit Over A 7.5 Inch Round Bar
• The Angled Bolt Plate Has A Slight Bend In The Frame. When Sewn, The Bend Is Angled Up Relative To The Fold And Tag
• Commercial Duty Bolt Plate Provides Great Strength And Durability
• Bolt Plate Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
• Angled Bolt Plate Is Designed To Be Mounted With A 0.50 Inch Diameter Bolt
• Strap Is Made With 4500 Lb Polyster Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Length Is Measured Tip Of The Sewn Loop To Center Of The Bolt Hole
• The Strap Is Sewn In The Standard Method To Meet The Listed Strength Rating
• 1.5 Inch Strap With 2 Inch Bolt Plate, There Is 1/2 Inch Of Play In The Bolt Plate Webbing Slot From The Narrower Webbing
• CustomTieDowns Strap Warning Tag Sewn On The Bolt Plate End

• Product Is Not A Sling Nor Rated For Use As A Sling. Do Not Use For Lifting Or Personal Restraint.