2 INCH OVERCENTER STRAPS

• Tie-downs, Overcenter Tie-down, S Hook With Retainer Clip On Both Ends
• Two Part Overcenter Buckle Tie-Down, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Buckle And Tightened During Use
• Overcenter Buckles Have A Specific Feeding Instructions Through The Buckle For The Strap To Hold Properly, Always Check The Instructions For Your Buckle Before Tightening
• S Hook With Retainer Clip Sewn On The End Of Both The Fixed End And Adjustable Straps
• The S Hook Openings Are Orientated So They Face The Same Direction
• Retainer Clip On The S Hook Allows The Hook To Clip On And Helps Prevent Disconnects
• Commercial Duty Overcenter Buckle For Great Strength And Durability
• Overcenter Buckle Is Made Of Steel And Has A Black Resin Finish
• Heavy Duty S Hook For The Highest Strength And Durabilty
• S Hooks Are Made Of Steel And Have A Black Vinyl Coating To Help Prevent Them From Scratching Their Surroundings. The Retainer Clip Is Made Of Steel And Has A Zinc-silver Plated Finish
• The Retainer Clip Is Pressed-in And Is At Its Lowest Point, The Clearance Is 0.30 Inches Between The Clip And The S Hook
• Strap Is Made With 6000 Lb Polyester Tie-down Webbing
• Sewn With Silver Polyester Thread
• Strap Lengths Are Measured As Only The Webbing Portion, Buckle And Hooks Are Not Included In The Measurement
• Sewn In The Standard Method To Meet Provided Strength Rating
• CTD Strap Warning Tag Sewn Next To The Hook On Both The Fixed And Adjustable Straps

• Overcenter Buckles Must Be Loaded Correctly For The Buckle To Function Properly And Hold Its Tension. Although Most Overcenter Buckle Tie-downs Are Loaded In A Similar Way, Each Style Of Buckle Can Have A Slightly Unique Loading Procedure. Always Check The Proper Operatining Instructions For Your Specific Overcenter Buckle
• On Hooks With Retainer Clips, Such As Snap Hooks, Carabiner Clips And Clippable S Hooks, The Retainer Clip May Push Into The Hook Cavity And Reduce The Connection Area Of The Hook. Always Check The Hook Clearance Spacing Will Work With Your Application