Email Support: Sales@CustomTieDowns.com | Customer Phone Support: 1-877-360-5528  
CustomTieDowns.com
Total:  View Shopping Cart

RACK-STRAP REPLACEMENT PARTS


PRODUCT NUMBER : 2183
  $25.99 per each
PRODUCT MODEL:  RS10Z-K8J
   
DESCRIPTION:
Rack-Strap RS10Z, Universal Replacement Strap Kit, Zinc-Silver Plated Hardware, Includes Replacement Tightening Rod, Rack-Strap Double J Wire Hook On End Of The Strap, Total Strap Length 8 Ft, CW15-K4PE 1.5 Inch 4M Black Polyester Tie-Down Webbing, Made In The USA.



STRENGTH RATING : 
BREAKING STRENGTH1500 lb ||  WORKING LOAD LIMIT500 lb
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528

 
Change Webbing Color:
SEE ALL VARIATIONS OF PRODUCT 2183


PRODUCT NOTES:
  • Rack-strap, Replacement Strap, J Hook On One End
  • Rack-Strap Universal Replacement Strap, Replacement Strap For All Current And Past Models Of Rack-Strap Tie-downs
  • Replacement Includes New Spindle Hardware, Plastic Knob And Replacement Strap With Hook
  • The Rack-Strap Tie-down Strap Is Contained Inside The Rack-Strap Frame And The Replacement Must Be Installed In The Same Manner As The Original
  • To Prepare The Replacement, Remove The Nut From Inside The Cavity Of The Plastic Knob, Unscrew The Knob Off The Threaded Stud And Remove The Snap Ring From The Spindle. After Those Steps, The Old Spindle Will Pull Out Of The Frame And The Old Strap Can Be Removed
  • To Properly Install The New Strap And Spindle, Follow The Installation Sheet Provided With The Product
  • J Hook On The End Of The Strap Is The Double J Configuration And Has A Special Back Bend To Fit The Rack-Strap Frame
  • Double J Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
  • All Attached Rack-Strap Hardware Has A Zinc-silver Plated Finish
  • Strap Is Made With 4500 Lb Polyester Tie-down Webbing
  • Sewn With Silver Polyester Thread
  • Strap Length Is Measured As The Total Maximum Length When The Strap Is Fully Extended From The Frame
  • Sewn In The Standard Method To Meet The Provided Strength Rating
  • Rack-Strap Brand Strap Warning Label Sewn On The Hook End Of The Strap
  • Includes A Replacement Tightening Rod


PRODUCT WARNINGS:
Assembled By: Rack-Strap, Inc.
Product Weight: 1.27 lb per each
2021-06-24
Variations of Product Type 2183

There are no variations of Product Type 2183 currently available.

If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com

or Call customer service at 1-877-360-5528, M-F during business hours.