MARCH MADNESS PROMO: FREE SHIPPING OVER $64, CODE: madness64 (click for info)
Email Support: Sales@CustomTieDowns.com | Customer Phone Support: 1-877-360-5528  
CustomTieDowns.com
Total:  View Shopping Cart

BOAT WINCH STRAPS - 3 INCH


PRODUCT NUMBER : 7083
  $25.49 per each
PRODUCT MODEL:  7083-Y16
   
DESCRIPTION:
3 Inch Strap, 1 Inch Flat Sewn Loop On One End, Combination Of CHD2-10M D-ring, CFC2-11M Clevis Connector And CHTH-10M Forged Snap Hook On The Opposite End, Total Strap Length 16 Ft, CW3K-Y18PE 3 Inch 18M Yellow Polyester Tie-Down Webbing With Black Edges, Assembled In The USA.



Quantity Discounts:
10 - 49 = $22.94
50+ = $20.65
STRENGTH RATING : 
BREAKING STRENGTH10000 lb ||  WORKING LOAD LIMIT3,333 lb
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
Change Strap Length (feet):
Need smaller length increments, call 1-877-360-5528
or email: sales@customtiedowns.com

 
CUSTOM IMPRINT
Change Webbing Color:
SEE ALL VARIATIONS OF PRODUCT 7083


PRODUCT NOTES:
  • Tie-downs, Strap Extender, Flat Sewn Loop On One End, Combination Of D-ring, Connector Clevis And Snap Hook On Opposite End
  • Strap Extender Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
  • 1 Inch Flat Loop On The End Of The Strap Can Be Attached To A Bolt Or To The Pin Inside A Boat Winch. 1 Inch Flat Loop Can Fit Over A 1/2 Inch (0.50) Inch Diameter Bolt Or Pin
  • Combination Of D-ring, Clevis Connector And Snap Hook On The Opposite End To Reduce Stress On The Webbing At The Hook End
  • D-ring In The Combo Provides The Strap A Lesser Wear Point
  • Clevis Connector Allows The Snap Hook To Be Connected To The D-ring
  • Snap Hook On The End Has A Spring Loaded Keeper To Prevent Unintentional Disconnects After Attachment
  • 2 Inch 10M Wire D-ring Is Made From 3/8 Inch Steel Wire. Combination Of 2 Inch D-ring Sewn To 3 Inch Webbing
  • D-ring Is Made Of Steel And Has A Zinc-yellow Plated Finish
  • 10M Forged Snap Hook Is Slightly Thicker Than The Corresponding Flat Snap Hook
  • Clevis Connector Is Made Of Steel And Has A Zinc-yellow Plated Finish
  • Forged Snap Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
  • Strap Is Made With Extra Heavy Duty 18000 Lb Polyester Tie-down Webbing. Webbing Nominal Thickness Is 0.08 Inch (2mm)
  • Sewn With White Polyster Thread
  • Strap Length Is Measured As The Webbing Portion Only Including The Flat Sewn Loop, The D-ring, Clevis Connector And Hook Are Not Included In The Measurement
  • Sewn In The Standard Method To Meet Provided Strength Rating
  • Combination Of D-ring, Clevis Connector And Snap Hook Is About 6 Inches In Length
  • CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Strap


PRODUCT WARNINGS:
  • If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up
Assembled By: CustomTieDowns.com
Product Weight: 3.13 lb per each
2023-01-30
Variations of Product Type 7083

There are no variations of Product Type 7083 currently available.

If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com

or Call customer service at 1-877-360-5528, M-F during business hours.