HOME

• Tie-downs, Cam Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
• Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Wrapped Around The Cargo And The Loose End Is Fed Back Thru The Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
• Cam Buckles Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
• End Of The Strap Is Angle Cut To Make Feeding The Strap Thru The Buckle Easier
• Protective Pad Made Of Webbing Sewn Under The Buckle To Help Prevent The Buckle From Scratching Its Surroundings
• Hook And Loop Strap Sewn Across Strap 3 Inches Back From Buckle. Hook And Loop Strap Is Used To Wrap Up Any Unused Strap During Use Or For Storage
• Cinch Style Buckle Has The Cinch Cambuckle Configuration Where The Strap Is Fed Bottom Of Buckle Thru Top Of Buckle And Pulled Tight
• Cinch Cam Buckle Is Made From Zinc-Diecast Metal And Has A Zinc-silver Finish. Zinc-Diecast Buckles Are Rust Proof
• Strap Is Made With 3000 Lb Polyester Tie-down Webbing. Protective Pad Is Made From Heavyweight Polyrpropylene Webbing
• Sewn With Silver Polyester Thread
• Strap Length Measured As The Webbing Portion Only, The Buckle Is Not Included In The Measurement
• Strap End Is Folded Under The Primary Strap, Rather Than Over Next To The Buckle, To Tuck The Cut End Between The Strap And Protective Pad
• No Strap Tag Or Labeling Sewn On The Product

• Cinch Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Bottom To Top In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Cam Teeth From Top To Bottom, It Will Not Hold To The Proper Strength